External Power Filter

AZOO EXTERNAL POWER FILTER

For freshwater, saltwater aquariums

FEATURES:

1. Powerful motor and ultra-quiet design for a silent, smooth operation.
2. Large capacity of filter media with high efficiency output to increase filter volume for providing clean water quality at all times.
3. Detachable water inlet/outlet design, easy installation and maintenance.
4. Energy saving, environmentally friendly design, safe and reliable to use.
5. Ideal for either hanging on the aquarium or placing on the table.

PRECAUTIONS:

1.  For safety use, please read the precautions carefully

     and pay attention to labels on the product.

2.  Before first use, check if the Voltage is appropriate

     for the filter. Make sure the power plug is secure and

     the socket is not shared with other appliances.

3.  The filter drum must be filled with water before

     plugged into power outlet.

     Otherwise the motor can easily be damaged due to empty-running.

4.  Do not attempt to dismantle or repair the motor in the filter drum.

5.  If the power cord is damaged, please stop using the product.

6.  If plug socket position below the filter drum, please make

     sure not to let the water come down along the power cord

     reaching power socket.

7.  This filter is only suitable for indoor aquariums use.

     Water temperature range 10℃~35℃; maximum height 60 CM.

8.  Ensure the unit is unplugged before installing or cleaning.

9.  For using in a new aquarium, please operate the unit for

     one day before introducing fish into the aquarium.

INSTALLATION INSTRUCTIONS:

A. Hang-on the aquarium B. Set on the table.

     Refer to and for Installation.

     (Filter media are included and loaded already in the filter drum)

     A. For Hang-on the aquarium

1.  Water Inlet Pipes Installing:

     Connect Elbow Connector (M), Nut (L), to Inlet Pipe (Q1, Q2);

     and Inlet Net (Q3) (Refer to Parts Assembly Drawing).

     Fix Water Inlet Pipes with Suckers (R) to Sucker Stand-Long

     (S2) and attach to the aquarium wall in a proper place

     as shown in Fig(2).

2.  Water Outlet Pipes Installing: Connect Elbow Connector (M),

     Nut (L), TPR Elbow (Short) (N) to Rain Pipe (P1.2).Users can

     choose to use either the Outlet Port (P3) or Rain Pipes (P)

     for different water outlet effects. Fix Water Outlet Pipes

     with Suckers (R) to Sucker Stand-short (S1) and attach to the

     aquarium wall in a proper place as shown in Fig(2).

3.  Set Hanging Hooks (U1) on the aquarium wall in a proper place.

     Fix Filter drum to the Hanging Hooks (U1) by Hanging

     frame (U) as shown in Fig(3). Connect Water Inlet/Outlet

     Pipes to filter drum with TPR Elbow (Long) (T) as shown in Fig(1).

     (Please pay attention to the Water In & Out indications on the filter.)

4.  Fill in filter drum with water as shown in Fig(5) and then

     plug in to start up the unit.

B.  For Stand on the table

1.  Assemble Water Inlet and Outlet pipes as shown and

     explained in Fig(2) and in 

     A. For Hang-On the aquarium above.

2.  Connect Water Inlet/Outlet Pipes to filter drum with

     60cm Soft Pipe (X). (Please pay attention to the

     Water In & Out indications on the filter.) Fix the 60cm

     Soft Pipe(X) with Curve Clip(Y) to adjust to a proper place

     as shown in Fig(4).

3.  Fill in filter drum with water as shown in Fig(5) and

     then plug in to start up the unit.

MAINTENANCE:

1.  Use normal cloth to carefully wipe to clean the surface

     of the unit. Never clean it with Gasoline of Cleanser.

2.  When there is unusual sound or high temperature appears

     during the operation, please stop to use the unit.

3.  Regular cleaning and replacement of the filter media,

     Active Carbon Pad(B2), Bio Sponge(B1), Bio Ring(W) is

     necessary for better filtration results.

4.  Cleaning or Replacement of filters

4-1. Unplug the unit, removes Water Inlet and Outlet Pipes

        (Be careful for the siphon effects) and then pull up Side

        Clip(F2) and Clip (F1)

4-2. Press the hook as indicated in Figure(7) to take

        apart Filter Lid(C)and Filter Cup(B) for cleaning or

        replacing Active Carbon Pad(B2), Bio Sponge(B1), Bio Ring(W).

Dimension of Body 20x12.2x18.2cm
Capacity of Filter Chamber 2.0L
Diameter of Tube ψ12mm x ψ16mm
Suitable for Aquarium 40~60cm (40~80L)